Important Coronavirus Information: Our warehouse remains open for online orders, however there may be additional delays in processing your order and deliveries via Australia Post may take longer than normal.  Thank you for your understanding.

Acmeda Roller Blind Component Selection

Acmeda Roller Blinds are manufactured in a number of component variants based upon the size (diameter) of your blind tubing and the date when your blind was manufactured.  The various components are often not cross-compatible so it is important to select the correct variant for your particular blinds.

 

From Left to Right:

RB08 40mm

The RB08 40mm model refers to blinds where the idler (pin end) uses a metal pin of approximately 3-4mm diameter, and the blind tubing measures approximately 38-40mm in external diameter (outside edge to outside edge).

RB08 40mm idler ends have 2 raised sections and 6 fins, and the clutch ends have 6 fins.

Shop for all compatible RB08 40mm parts.

RB08 45mm

The RB08 45mm model uses the same pin style as the 40mm model, but the components are slightly larger to be used in blind tubing measuring 43-46mm in external diameter.

RB08 45mm idler ends have 2 raised sections and 8 fins, and the clutch ends have 8 fins.

Shop for all compatible RB08 45mm parts.

RB09 45mm

The RB09 model refers to blinds where the idler (pin end) uses a plastic pin of approximately 10-12mm in diameter.  All RB09 components are made in the '45mm' size for tubing measuring 43-46mm in external diameter.

RB09 45mm idler ends have 8 fins but no raised sections, and the clutch ends have 8 fins and a notched tab at the 'pointy end' used to separate the cover plate from the clutch when installing a chain.

Shop for all compatible RB09 45mm parts.